Amps
[Top] [All Lists]

Re: [Amps] Question about safety ground connection

To: amps@contesting.com
Subject: Re: [Amps] Question about safety ground connection
From: "Will Matney" <craxd1@verizon.net>
Reply-to: craxd1@verizon.net
Date: Tue, 15 Nov 2005 22:36:31 -0500
List-post: <mailto:amps@contesting.com>
Mike,

It has to carry it when there's a fault :)

Best,

Will

*********** REPLY SEPARATOR  ***********

On 11/15/05 at 10:32 PM m.ford wrote:

>----- Original Message ----- 
>From: <Gudguyham@aol.com>
>To: <garyschafer@comcast.net>; <dezrat1242@ispwest.com>;
><amps@contesting.com>
>Sent: Tuesday, November 15, 2005 8:39 PM
>Subject: Re: [Amps] Question about safety ground connection
>
>
>> 
>> In a message dated 11/13/2005 9:49:16 P.M. Eastern Standard Time,  
>> garyschafer@comcast.net writes:
>> 
>> Safety  ground should never carry current.
>> 
>If that were true then the GFI circuit would not function.
>
>Mike k1ern
>
>> 73
>> Gary   K4FMX
>> 
>> 
>> 
>> 
>> 
>> 
>> RIGHT ON GARY!!!!!
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>> 
>> 
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date:
>11/11/2005
>> 
>>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>