And many electricians will mark those "hot" white wires with a couple of
black stripes with a magic marker.
Mike, W1NR
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Gudguyham@aol.com
Sent: Tuesday, November 15, 2005 8:25 PM
To: craxd1@verizon.net; amps@contesting.com
Subject: Re: [Amps] Question about safety ground connection
In a message dated 11/15/2005 1:20:38 P.M. Eastern Standard Time,
craxd1@verizon.net writes:
I always want to know a neutral isn't hot unless it's going to a switch leg
which I think is the only NEC exception to the rule.
Best,
Will
If a "white" wire is hot, it is not a neutral. So a neutral is never hot
unless there is a fault.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|