----- Original Message -----
From: "Gary Schafer" <garyschafer@comcast.net>
To: "'m.ford'" <k1ern@direcway.com>; <Gudguyham@aol.com>
Cc: <amps@contesting.com>
Sent: Tuesday, November 15, 2005 10:47 PM
Subject: RE: [Amps] Question about safety ground connection
>
>
>> -----Original Message-----
>> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>> Behalf Of m.ford
>> Sent: Tuesday, November 15, 2005 9:33 PM
>> To: Gudguyham@aol.com
>> Cc: amps@contesting.com
>> Subject: Re: [Amps] Question about safety ground connection
>>
>>
>>
>> ----- Original Message -----
>> From: <Gudguyham@aol.com>
>> To: <garyschafer@comcast.net>; <dezrat1242@ispwest.com>;
>> <amps@contesting.com>
>> Sent: Tuesday, November 15, 2005 8:39 PM
>> Subject: Re: [Amps] Question about safety ground connection
>>
>>
>> >
>> > In a message dated 11/13/2005 9:49:16 P.M. Eastern Standard Time,
>> > garyschafer@comcast.net writes:
>> >
>> > Safety ground should never carry current.
>> >
>> If that were true then the GFI circuit would not function.
>>
>> Mike k1ern
>>
>
> A GFI circuit does not rely on a ground connection for operation. It only
> monitors to see if there is a difference in current between the hot and
> neutral wire.
>
> 73
> Gary K4FMX
>
And where does that difference go?
Mike k1ern
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|