> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of m.ford
> Sent: Tuesday, November 15, 2005 9:33 PM
> To: Gudguyham@aol.com
> Cc: amps@contesting.com
> Subject: Re: [Amps] Question about safety ground connection
>
>
>
> ----- Original Message -----
> From: <Gudguyham@aol.com>
> To: <garyschafer@comcast.net>; <dezrat1242@ispwest.com>;
> <amps@contesting.com>
> Sent: Tuesday, November 15, 2005 8:39 PM
> Subject: Re: [Amps] Question about safety ground connection
>
>
> >
> > In a message dated 11/13/2005 9:49:16 P.M. Eastern Standard Time,
> > garyschafer@comcast.net writes:
> >
> > Safety ground should never carry current.
> >
> If that were true then the GFI circuit would not function.
>
> Mike k1ern
>
A GFI circuit does not rely on a ground connection for operation. It only
monitors to see if there is a difference in current between the hot and
neutral wire.
73
Gary K4FMX
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|