Amps
[Top] [All Lists]

Re: [Amps] [BULK] - DIN stands for....?

To: Bill Turner <dezrat@copper.net>
Subject: Re: [Amps] [BULK] - DIN stands for....?
From: "m.ford" <k1ern@direcway.com>
Date: Mon, 27 Feb 2006 11:15:18 -0500
List-post: <mailto:amps@contesting.com>


> ORIGINAL MESSAGE:
> 
> At 06:26 AM 2/27/2006, Pete Smith wrote:
> 
>>I use trailer connectors from the local NAPA auto parts store - <$6 
>>for 6 conductors, absolutely weatherproof, and VERY sturdy.
>>
>>73, Pete N4ZR
> 
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Aren't they only 12-volt rated?
> 
> 73, Bill W6WRT
> _______________________________________________

My C.A.T.S. rotator came with an Amphenol connector on the rotor and
a kit for the cable end ( the jones plug is on the box end ).

I spent about ten minutes with the Amphenol kit before giving up and
installing one of the trailer connector pairs that I bought from Radio Works
a few years ago. 12 volts may be the application but I would feel safe
using them at 24, 48, or even 240 vac.  Once mated, I wrap the union with
electrical tape and then apply a coat of GE silicon II.

Mike  k1ern

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>