My example was wrong,.
> has a little more voltage at the same current, but not
> much.
> We've added about 2.5 watts maximum heat to each
> transformer that would normally be dissipating about 5
> watts
> at full load.
That should have been "added about 1.25 watts maxmum heat to
each transformer", not 2.5 watts.
> You can see in this case the error between transformers,
> even in the case of very stiff transformers, has to be
> pretty large to add significant heat. In this case a ~5%
> open circuit voltage error produced an additional 50%
> heat.
That should have been about 25% more heat added from a 5%
voltage error in this example.
73 Tom
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|