Amps
[Top] [All Lists]

Re: [Amps] Resistor Before the Capacitor? (long)

To: <amps@contesting.com>
Subject: Re: [Amps] Resistor Before the Capacitor? (long)
From: "Paul Christensen" <w9ac@arrl.net>
Date: Mon, 8 Feb 2010 14:10:05 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi George,

To Jim's earlier point, he did indicate that his series R between the 
full-wave rectifier and filter C needed to be augmented by an arc-fault 
resistor after the filter C for the very reason you describe.

Paul, W9AC

----- Original Message ----- 
From: <gdaught6@stanford.edu>
To: <amps@contesting.com>
Sent: Monday, February 08, 2010 1:38 PM
Subject: Re: [Amps] Resistor Before the Capacitor? (long)


> Several people have contributed to this topic.  I'm not sure they have all 
> understood
> the function of a "glitch" resistor, at least MY idea of the function of a 
> glitch resistor.
>
> Putting the resistor "before the capacitor" will certainly limit the huge 
> start-up
> charging surge, thereby helping to protect the rectifier diodes, which 
> cost $0.11 each
> the last time I bought a hundred of them.  It will also limit the DC 
> (steady-state)
> current supplied to an HV short, like an arc in a tube.  But the full 
> energy stored in
> the capacitor WILL BE AVAILABLE  to vaporize some bits inside your tube.
>
> The tube costs well over 11 cents, so I choose the "after the capacitor" 
> position for
> the resistor.
>
> 73,
>
>
>
>
> George T Daughters, K6GT
> CU in the California QSO Party (CQP)
> October 2-3, 2010
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>