On 4/29/2012 11:01 PM, Charles Harpole wrote:
> I know ever coax joint, every coax switch, and so on costs rcv db.
You "know" WRONG! This is one of those often repeated myths with little
basis in fact. A properly done coax connection is essentially lossless
at HF. Loss in a switch depends on the quality of the switch. There are
commonly available relays and switches and connectors with loss too low
to measure, and there are poorly built and junk parts that will
overheat, go intermittent, and/or fail.
73, Jim K9YC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|