Amps
[Top] [All Lists]

Re: [Amps] Building an Amp 101

To: amps@contesting.com
Subject: Re: [Amps] Building an Amp 101
From: Bill Turner <dezrat1242@wildblue.net>
Date: Sat, 18 Jan 2014 10:18:47 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
ORIGINAL MESSAGE:          (may be snipped)

n 1/18/2014 9:52 AM, Jim Garland wrote:
I agree that one shouldn't leave the unused segments of of a tank coil
completely floating, and I don't do that. As you suggest, I connect the
wiper on the bandswitch to the cold (antenna) end of the inductor so that
the switch shorts the unused segments. For esample, if operating 10m, the
15m tap is shorted by the wiper to the 160m tap at the far end of the coil.

REPLY:

This method works and is commonly used, but there is another way, which I think has some advantages.

I have separate coils for each band. They are NOT magnetically coupled to each other even though they are in series. Each coil is oriented 90 degrees to it's neighbor and they alternate vertical and horizontal with each band so the coils do not "see" their neighbor.

The tradeoff is this requires larger coils, since even though they are in series, they have almost no magnetic coupling between them. The advantage is that none of the coils need to be shorted out by the bandswitch and therefore no current flows through the "short". I know this approach will not appeal everybody but it works for me.

73, Bill W6WRT

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>