I've had burned fingers during FD running the twinlead fed off center
fed diople on some bands.
Makes it less than my favorite.
73, Jerry, K0CQ
Tim Randa wrote:
> I believe most "windoms" used today are basically off center fed dipoles
> with some sort of rf choke at the feed point. I've used one for years and
> have had good results.
> de Tim K?FL
> ----- Original Message -----
> From: "Dr. Gerald N. Johnson, electrical engineer" <firstname.lastname@example.org>
> To: <email@example.com>
> Sent: Tuesday, August 12, 2003 6:29 PM
> Subject: Re: [TenTec] Argo Speech Processor Question (was Argo V distortion)
> > The ORIGINAL Windom was a single wire feeder, always with a tuner and
> > lots of RF in the shack.
> > 73, Jerry, K0CQ
> > --
> > Entire content copyright Dr. Gerald N. Johnson, electrical engineer.
> > Reproduction by permission only.
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
Entire content copyright Dr. Gerald N. Johnson, electrical engineer.
Reproduction by permission only.