TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[TenTec] Re [Ten Tec] Grounds and balanced fed verticals

from [ChasW3KC] [Permanent Link][Original]
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: [TenTec] Re [Ten Tec] Grounds and balanced fed verticals
From: "ChasW3KC" <w3kc@verizon.net>
Reply-to: ChasW3KC <w3kc@verizon.net>, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 26 Jan 2012 23:57:55 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com> 
Rockey W9SCH used open wire feedline on his "Upper Outer" antenna.
He trimmed the horizontal wire to equalize current on each side of the 
feedline.

73 de Chas W3KC 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TenTec] Re. [Ten Tec] --- and balanced fed verticals, Jim Brown
Next by Date:  Re: [TenTec] Source for large knife switch, John Molenda
Previous by Thread:  Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Jerry Haigwood
Next by Thread:  Re: [TenTec] Re. [Ten Tec] Grounds and balanced fed verticals, Rick - DJ0IP / NJ0IP
Indexes:  [Date] [Thread] [Top] [All Lists]