TenTec
[Top] [All Lists]

Re: [TenTec] RASCAL interface and the Orion 565

To: tentec@contesting.com
Subject: Re: [TenTec] RASCAL interface and the Orion 565
From: "k0bx@arrl.net" <k0bx@arrl.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 16 Oct 2012 17:31:59 -0700 (PDT)
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Yes that is my point, PTT and CW are on the same pin on the AUX connector.  It 
seems to me that during RTTY, other digital modes, and SSB, the PTT should work 
normally through the Rascal interface.  When the rig is in CW, then the Orion 
should key CW through the Rascal as it is only a one transistor keying circuit 
for PTT.
Before I tell my buddy what to buy, I just wanted to make sure what I am seeing 
in the TT manual and what will happen is the same.  Hi Hi

Joe K0BX



 Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk) without 
my permission.




________________________________
From: Robert Mcgraw <rmcgraw@blomand.net>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Sent: Wed, October 17, 2012 12:24:56 AM
Subject: Re: [TenTec] RASCAL interface and the Orion 565

Isn't the PTT function and the CW keying function from the AUX connector
the same exact function?  It is on the Omni VII and the Eagle.  In other
words, I don't think there is a difference.

73
Bob, K4TAX



> Hi Guys, I am looking for someone who has interface the 'Rascal' to the
> 565.
>
> My friend is the one that has the 565 and wants to get on RTTY.
>
> The Rascal Interface with it custom cable for the 565 seems to do just
> want he
> wants.
> BUT He uses PIN3 of the Orion II 8 pin I/O connector for CW Keying.  The
> Rascal
> uses that pin for PTT.
>
> It seems that the Orion would be smart enough for use PIN 3 for PTT when
> in RTTY
> and Pin 3 for CW keying when in CW without anything else?
>
> Since I don't have the rig, maybe someone has an answer to this question.
>
> Thanks  Joe K0BX
>
> Link to Rascal:
>
>http://www.buxcomm.com/catalog/index.php?main_page=product_info&cPath=2&products_id=146
>6
>
>
>  Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without
> my permission.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>