TenTec
[Top] [All Lists]

Re: [TenTec] In praise of older technology AM transmit with TenTec rigs

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] In praise of older technology AM transmit with TenTec rigs
From: Barry N1EU <barry.n1eu@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 25 Feb 2014 20:37:50 +0000
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
I might be wrong, but I believe the AM tx bw is fixed (3KHz audio,
6KHz wide am signal) and the bw and roll off controls are ignored in
AM.

73, Barry N1EU

On Tue, Feb 25, 2014 at 8:03 PM, GARY HUBER <glhuber@msn.com> wrote:
> A TenTec 705 microphone into the OMNI-VII with the TX ROLL OFF set to 150 Hz
> and TX BW set to 3400 and TX EQ 0 dB driving a Titan to 300 W (on peaks) is
> said, on the local 160 AM net, to sound just exactly like I do face to face.
> The transmitted pattern as seen on a FLEX-1500 in panadapter mode shows
> about a 18 dB roll off between 300 Hz and 3300 Hz not at all unlike the
> pattern of a commercial AM station.
>
>
> 73 ES DX,
> Gary -- AB9M
>
> -----Original Message----- From: R. Eric Sluder-W9WLW
> Sent: Tuesday, February 25, 2014 12:41 PM
>
> To: Discussion of Ten-Tec Equipment
> Subject: Re: [TenTec] In praise of older technology AM transmit with TenTec
> rigs
>
> I'm told that I sound acceptable for a non-boatachor using the Omni VII.   I
> believe the audio is adjustable on the O7 using the AM mode, but I haven't
> tried real hard to improve my audio any.  Since we're on the topic, I'll
> give the Eagle credit where credit is due.  I'm always complimented on how
> well I sound using the Eagle.  I use the same mic for both rigs (TT 709). I
> check into an AM net on Friday evenings and us an AL-80a for extra kick, and
> some of the fellas are hard pressed to believe I'm using a modern rig. :-)
> The others usually talk about it later when the frequency switches back over
> to SSB.  You hear them talking about how well the Eagle sounds and you can
> tell they're mulling over looking into getting one.
>
>
>
> - R. Eric Sluder
>
> W9WLW
>
>
>
>
>
>
>> ________________________________
>> From: Mike Bryce <prosolar@sssnet.com>
>> To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>> Sent: Tuesday, February 25, 2014 1:04 PM
>> Subject: Re: [TenTec] In praise of older technology AM transmit with Ten
>> Tec rigs
>>
>>
>> I’ve used my Omni VII on AM on 7.290 and they say it sounds great. It does
>> lack the punch of the heavy iron guys,
>>
>> I run a Centaur amplifier for some added kick, sometimes 40 meters and AM
>> don’t play well together.
>>
>>
>> Mike, WB8VGE
>> SunLight Energy Systems
>> The Heathkit Shop
>> http://www.theheathkitshop.com/
>> J e e p
>> o|||||||o
>>
>> A man with one clock knows what time it is. A man with two clocks is never
>> sure.
>>
>>
>>
>> On Feb 25, 2014, at 12:50 PM, k6jek <k6jek@comcast.net> wrote:
>>>
>>>
>>>
>>> I haven't really tried the OMNI VII as an AM transmitter since I have
>>> others -- class E, class D, Johnson, etc. I wonder if anyone on this
>>> reflector has.
>>>
>>> Jon
>>>
>>
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
<Prev in Thread] Current Thread [Next in Thread>