Re: [TenTec] din connector, etc.

[Carl Moreschi <n4py3@earthlink.net>]

Actually most radios do work that way.  Take a look at the CW RF 
pictures in QST.  There are two traces in the scope pictures.  One shows 
key closure and the other shows RF waveform.  Most show the RF waveform 
runs behind the key closure by around 15 msec and is not shortened.
Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 9/24/2014 7:50 PM, Jim Brown wrote:
> On Wed,9/24/2014 4:45 PM, Bob McGraw - K4TAX wrote:
> > It does not shorten the dit. From key closure, it delays it by ~17ms
> > from start to finish.
> That would be fine if it works that way, but it does not with most rigs.
> Have either of you verified that it does (with a dual trace scope)?
>
> 73, Jim K9YC
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec