I concur with Rick's comment. It also depends on one's willingness to learn
the radio and become familiar with its features and functions.
It took me a while to get to know my Orion 2, purchased in 2007, but I would
not part with it for anything else. It's the best radio I've ever owned.
73, Tony VE3DWI
Sent from my BlackBerry 10 smartphone on the Bell network.
Original Message
From: Rick - DJ0IP / NJ0IP
I have used the Eagle as my main radio for 4 years.
Once you get used to its peculiar ergonomics, it is actually very easy to
use.
It's only a problem if you have other radios and switch back and forth a
lot.
73 - Rick, DJ0IP
(Nr. Frankfurt am Main)
-----Original Message-----
From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of Billy Cox
Sent: Thursday, December 11, 2014 6:33 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] TS590SG Sherwood numbers = Orion
Totally agree Barry as I stated too, yet it has known limitations.
BTW Gary, I made plenty of contest QSOs and worked many countries with my
Heathkit SB-102 despite it not being a 'contest quality'
radio or having ever been rated by Rob Sherwood either. hihi
While Sherwood's data is excellent and one form of a very useful benchmark,
ergonomics also plays into this. For me, and perhaps only me, the K3 does
not meet my ergonomic expectations. On the other hand, the Orion platform
does very well for my needs.
Repeat after me, "There is no one perfect rig for everyone".
Have fun in the 10m contest this weekend!
73 de Billy, AA4NU
----- Original Message -----
From: "Barry N1EU" <barry.n1eu@gmail.com> The issue with the Eagle is
ergonomics, not performance. The Eagle receiver is top notch.
Barry N1EU
On Thu, Dec 11, 2014 at 4:42 PM, G Reichow <wa0yle12@gmail.com> wrote:
> Well, the Eagle may not be a 'contest quality' radio but that is what
> I'm gonna use in the 10M contest this weekend. My IC-737 may not have
> been contest quality either but it worked just fine during the
> CQWW-CW.
>
> Gary - KN0V
>
> On 12/11/14, Barry N1EU <barry.n1eu@gmail.com> wrote:
> > oops, sorry Don, missed your later update - too long a thread
> >
> > Barry N1EU
> >
> > On Thu, Dec 11, 2014 at 9:21 AM, Barry N1EU <barry.n1eu@gmail.com>
> wrote:
> >
> >> I read better. "1st IF frequency (11.374 MHz) down conversion* is
> >> employed when receiving on 15, 20, 40, 80 or 160 meter bands.
> >>
> >> Barry N1EU
> >>
> >> On Thu, Dec 11, 2014 at 12:25 AM, Don Rasmussen via TenTec <
> >> tentec@contesting.com> wrote:
> >>
> >>> I read the upconversion is on 10m and 12m, also anytime the
> >>> selected bandwidth is >2.7Khz.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|