OK, it's officially panic time. Just upgraded to 10.42C and now I can't seem to get Writelog to poll the rig for band, frequency, mode, etc. Had it working before with 10.39C and think all the connec
Running Pentium III Compaq Presario laptop with Windows ME, Com1 for CW, soundboard DVK (works), Com2 to a CT17 (works for DXBase). Gary, AL9A _______________________________________________ WriteLog
'Rig Type' under Setup/Ports is configured correctly, however this window is missing an entire column called 'Rig' which used to be there to set the Comm port to be used for reading the rig frequency
Some progress being made, but not there yet. I've enabled the Comm2 line in Setup/Ports to the IC-756Pro and saved the configuration. Now the 'NO RIG' message in the Entry is gone and replaced with k
It's now official - I'm an IDIOT! Just rechecked the Setup/Ports dialog box for the 972nd time and finally realized there is a difference between IC-756 and IC-756PRO in the drop down boxes! When set
Just got a new "toy" yesterday, an IC-PW1 amplifier, that I am trying to get interfaced to the rig and the PC. The manual says all CI-V addresses should be the same, as should the baud rates. The def
First, thanks to all who replied to my missive. A point of clarification is needed. Dick is correct in stating that the manual says all CI-V devices should be set to the same SPEED. However, my manua
Having a similar problem here. No USB to Serial converter involved. Using a Rigblaster Plus and the IC-17 Level Converter. Dxbase 2003 can communicate with the 706MKII and vice versa, but no communic
Now it's all good news from here! As I suspected, reinitializing the PW1 to the 706MKII with the modified CI-V address of 48H corrected the communication problem between the two. Now Writelog, the 70
Problem has been solved. Apparently all models of the IC-706 must have their CI-V address set to 48H as that is the only address recognized by Writelog.. Changing the default address did the trick. G
Make a file named 'question.wav'. It will be sent when Writelog sees a ? in the call field. Gary AL9A field). by %C _______________________________________________ WriteLog mailing list WriteLog@cont
The text below is from the Contests section of the WriteLog Help file: "Any module that tracks DXCC countries uses either the DXCCDOS.DAT file (ARRL countries list) or the DXCCWAE.DAT file (includes
Bob, I seem to remember some earlier threads on this topic. I think the problem was in the font style or size used in the CW Keyboard Window. Compare which font and type size is being used on the tow
Had renew my registration code so I could get the V10.52F latest update. Downloaded the full program zip file, not just the interim update, into C:\Program Files\ham\Programs and extracted the files.
John, Are you sure the multiplier window "does not stay on my screen", or is it being covered up by the main Writelog window? The multiplier window doesn't have a "stay on top" setting, so when the f
I'm using Writelog V10.52F in the ARRL DX SSB contest and have tried without success to enable the "Continuously Record Audio to file" feature. This feature has worked in previous contests with earli
OK Hal, now make it four different QTHs you've fixed the continuously record problem. I checked the writelog.ini file and found the path pointed to a folder named AudioRecording. As I initially menti
Just submitted my ARRL DX SSB cabrillo and got back the acceptance message within minutes. No problems at all. Using V10.52F. Gary AL9A _______________________________________________ WriteLog mailin
Hi Phil, You don't download the Super Check Partial files per se, rather you download the entire set of four "Master" files then select which one you want the Super Check Partial feature of Writelog
I recently acquired DSL capability and am finally able to access DX clusters via Telnet. I am using the VE7CC AR User interface to set filters, parameters, etc. Much to my surprise, getting Writelog