Amps
[Top] [All Lists]

[AMPS] Blown TL922A... What to do?

To: <amps@contesting.com>
Subject: [AMPS] Blown TL922A... What to do?
From: rfamps@ic24.net (Steve Thompson)
Date: Fri, 8 Sep 2000 17:24:22 -0700
    
-----Original Message-----
From: measures <2@vc.net>
To: amps <amps@contesting.com>
To: <amps@contesting.com>
Date: 08 September 2000 05:51
Subject: Re: [AMPS] Blown TL922A... What to do?
snip


>>Has anyone been able to measure the frequency of oscillation in, for
>>example, TL922? 
>
>The only case I have knowledge of involved loosely coupling a spectrum 
>analyzer to the anodes of a seemingly stable* SB-220.  Whenever 
>anode-current changed, damped wave ringing at c. 110MHz was observed.  
>/*note: no bandswitch or Tune-C arcing took place during the test/
>
>>What dip frequencies are found with a GDO in a 922? 
>
>Measuring at the dc blocking C, typically c. 120MHz.  There is a slight 
>variation depending on the setting of C-tune.  
A few%, 10%, 25%?

Thanks,

Steve


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>