To: | cq-contest@contesting.com |
---|---|
Subject: | Re: [CQ-Contest] 40m lower band edge SSB |
From: | Jim Brown <k9yc@audiosystemsgroup.com> |
Reply-to: | k9yc@arrl.net |
Date: | Tue, 1 Nov 2016 21:21:23 -0700 |
List-post: | <cq-contest@contesting.com">mailto:cq-contest@contesting.com> |
On Tue,11/1/2016 3:21 PM, donovanf@starpower.net wrote: 7127 is too low, 7128 should be ok. Even 7128 is pushing it -- if you're TX with a 2.7 kHz filter and the low side of the filter is at 500 Hz, your RF -3dB points would be 7124.8 - 7127.5. Add another 200-400 Hz for filter skirts to get down to -30dB re: PEP. AND is if your power amp is clean -- I see far too many that are NOT, splattering another3- 5 kHz either side of THAT bandwidth. Those stations would have to stay above 7132 kHz! 73, Jim K9YC _______________________________________________ CQ-Contest mailing list CQ-Contest@contesting.com http://lists.contesting.com/mailman/listinfo/cq-contest |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [CQ-Contest] It's not the sunspots folks, Mark |
---|---|
Next by Date: | Re: [CQ-Contest] oxidized inner conductor when coax carries DC power, Gerry Treas K8GT |
Previous by Thread: | Re: [CQ-Contest] 40m lower band edge SSB, donovanf |
Next by Thread: | Re: [CQ-Contest] 40m lower band edge SSB, Gerry Hull |
Indexes: | [Date] [Thread] [Top] [All Lists] |