Scott
We are using connectors from Amphenol with Semi-ridge cable, we make and
test them in house. This allows for a very strong solder connection so
there is no movement on the internal solder connection.
Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Scott Stevens
Sent: Wednesday, May 22, 2002 5:51 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] 200mW cards in question
On 5/22/02 1:53 PM, "Tony" <tonylist@wwwbiz.com> wrote:
> Scott
>
> We tested on channel one with a know good connector and card, using a
> HP analyzer for testing. Using the Prism test util we put the card in
> constant transmit mode.
>
> I will tell you this we have see 1-2 db difference depending on what
> cable and connector is used.
>
So who's pigs do you suggest?
--
Scott Stevens
800-815-4682
scott@scottstevens.net
orders@scottstevens.net
support@scottstevens.net
"Always on E-Mail and 24/7 Support"
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|