Karlnet
[Top] [All Lists]

Re: [Karlnet] AP Plus Client connectivity

To: <karlnet@WISPNotes.com>
Subject: Re: [Karlnet] AP Plus Client connectivity
From: "Russ Kreigh" <kreigh@onlyinternet.net>
Reply-to: karlnet@WISPNotes.com
Date: Wed, 24 Jul 2002 19:22:03 -0700
List-post: <mailto:karlnet@WISPNotes.com>
Sounds like an authentication issue to me....?



----- Original Message -----
From: "Ian Hastie" <ian@linkit.co.nz>
To: <karlnet@WISPNotes.com>
Sent: Wednesday, July 24, 2002 4:51 PM
Subject: [Karlnet] AP Plus Client connectivity


> I have already deployed the AP+ and RG SEC Sats which are working OK, just
> now the client wants to know if the AP+ will support USB clients or
wireless
> clients?
> I tried to connect with a PC client and could access the radio network but
> not connect to the ethernet side of the AP.
>
> I am prob wrong but I thought the AP+ was still running as a true 802.11b
AP
> hence it should do.
>
>
> So please clarify the following is correct
>
> 1) A Karlnet AP-Plus load in an RG1000 or AP1000 will only allow RG1000's
> running SEC Client load to connect to them. eg it is no longer running
> 802.11b complaint thus USB etc wont connect
>
> 2) An RG1000 with SR 4500 SEC Client load will talk to
> i) Any Std 802.11b AP eg RG1000 with AP500 load
> ii) Only the SEC AP Plus  in an RG1000 or AP1000 presently
>
> Before I go out again and waste alot of time on site...
>
>
> Regards
> Ian Hastie
> LINKIT
> NEW ZEALAND
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>


<Prev in Thread] Current Thread [Next in Thread>