Yes Russ,
Authentication is set ON but we added the wireless card to the access list
as per the RG's and still no joy. Because its live I dont want to open it up
and test.
Regards
Ian Hastie
LINKIT
NEW ZEALAND
Sounds like an authentication issue to me....?
----- Original Message -----
From: "Ian Hastie" <ian@linkit.co.nz>
To: <karlnet@WISPNotes.com>
Sent: Wednesday, July 24, 2002 4:51 PM
Subject: [Karlnet] AP Plus Client connectivity
> I have already deployed the AP+ and RG SEC Sats which are working OK, just
> now the client wants to know if the AP+ will support USB clients or
wireless
> clients?
> I tried to connect with a PC client and could access the radio network but
> not connect to the ethernet side of the AP.
>
> I am prob wrong but I thought the AP+ was still running as a true 802.11b
AP
> hence it should do.
>
>
> So please clarify the following is correct
>
> 1) A Karlnet AP-Plus load in an RG1000 or AP1000 will only allow RG1000's
> running SEC Client load to connect to them. eg it is no longer running
> 802.11b complaint thus USB etc wont connect
>
> 2) An RG1000 with SR 4500 SEC Client load will talk to
> i) Any Std 802.11b AP eg RG1000 with AP500 load
> ii) Only the SEC AP Plus in an RG1000 or AP1000 presently
>
> Before I go out again and waste alot of time on site...
>
>
> Regards
> Ian Hastie
> LINKIT
> NEW ZEALAND
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|