RE: [Karlnet] AP Plus Client connectivity

["Ian Hastie" <ian@linkit.co.nz>]

Thanks Charles I'll try both options tomorrow

Regards
Ian Hastie
LINKIT 
NEW ZEALAND
----------------

>1) A Karlnet AP-Plus load in an RG1000 or AP1000 will only allow RG1000's
>running SEC Client load to connect to them. eg it is no longer running
>802.11b complaint thus USB etc wont connect

wrong - AP-Pluses are 802.11b compliant (some of the older 2 mb cards have
problems, but they are 802.11)

>2) An RG1000 with SR 4500 SEC Client load will talk to
>i) Any Std 802.11b AP eg RG1000 with AP500 load

in NAT or Routing mode

>ii) Only the SEC AP Plus  in an RG1000 or AP1000 presently

in bridging mode

>Before I go out again and waste alot of time on site...

any more questions?

-Charles

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet