I asked this some exact question and some wise-ass gave me the
"definition" of inhibit.
Dan Metcalf
Wireless Broadband Systems
http://www.wbsysnet.com/
877-685-0578
dan.metcalf@wbsysnet.com
> -----Original Message-----
> From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On
> Behalf Of Larry Yunker - Cyber Broadcasting
> Sent: Monday, October 21, 2002 4:00 PM
> To: karlnet@WISPNotes.com
> Subject: Re: [Karlnet] New KarlNet .bin files released
>
> What exactly does this do?
>
> - Inhibit Private NAT through selected Interfaces
>
> Does this somehow block a customer from running a NAT router (like a
> Linksys
> Cable-Modem-router) behind say an RG1000? If so, HOW????? Would it
also
> block Internet Connection Sharing??
>
>
>
> ----- Original Message -----
> From: "Charles Chia Sheng Wu" <cwu@cwlab.com>
> To: <Agere@part-15.org>
> Cc: <isp-wireless@isp-wireless.com>; <karlnet@WISPNotes.com>;
> <equipment-l@wisp-equipment.net>
> Sent: Wednesday, October 16, 2002 2:59 PM
> Subject: [Karlnet] New KarlNet .bin files released
>
>
> > v4.27
> >
> > New Features of 4.27
> > - MAC Auth Library (AP Radius and MAC Access List)
> > - IP Multicast Pruning
> > - Inhibit Private NAT through selected Interfaces
> > - Block inter-client communication on the same interface
> > - Simple Firewall
> > - WEP Support for Intersil Cards in 802.11b mode
> > - IAPP
> > - PPoE Filtering
> > - TurboCell Polling update for large Networks
> > - Updated Windows based configurator
> > - Updated Help Files and Documentation <g>
> > - value range for pings is now 64-2000 Bytes (as opposed to the 1472
> Byte
> > limit)
> >
> >
> > Corrected issues in 4.27
> >
> > - RIP-2 in kernel 4.13 use triggered updates to send empty default
route
> > - Station list is being corrupted re:RADIUS re-Auth
> > - Permission denied problem for read only kernel and temp bin file
not
> > removed
> > - Default Bandwidth throttling is not working correctly in kernel
4.02
> > - Garbage collection is not working
> > - RIP2 default gateway is not sent after learned by device
> > - After initial upload of SEC only builds, AP option in the
interface is
> not
> > dimmed
> > - Base can not do Radius Authentication for Satellite when the other
> > wireless interface is configuring in AP mode
> > - Kernel 4.00 doesn't load on a WP-II
> > - MIB-II Routing table is not updated
> > - Outdoor Router does use 'preferred IP address' as source address
for
> ICMP
> > 'TTL expired in transit' message
> > - Firewall option fails to function correctly with VPN / IPSEC
through
> the
> > RG
> > - Incoming NAT using wildcard port blocks Outgoing NAT for other
clients
> > - DHCP Client of AP-1000 is renewing the IP addresses to soon
> >
> > Features for next release
> > - VLAN Support
> > - Continued Improvement of Documentation
> > - TurboCell Autoroam Feature
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
> ---
> [This E-mail scanned for viruses by Declude Virus]
|