RE: [Karlnet] POE question

["Travis Brown" <travis@netwaveva.com>]

Some runs 50', a couple are more like 100'...

 

Travis

-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com] On Behalf Of Charles Chia Sheng Wu
Sent: Thursday, January 02, 2003 10:14 AM
To: karlnet@WISPNotes.com; karlnet@WISPNotes.com
Subject: RE: [Karlnet] POE question

how far are you running the Ethernet?

 

-Charles

-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On Behalf Of Travis Brown
Sent: Thursday, January 02, 2003 8:26 AM
To: karlnet@WISPNotes.com
Subject: [Karlnet] POE question

First, Happy New Year all!

Second, when using POE on an RG-1x00, what is the maximum voltage I should see at the RG end of the POE cable? It's hard to regulate.

In my latest install, I used the standard RG wall wart, and I get ~8.9 VDC at the RG, but the RG keeps rebooting, just like what I see when I use some 100mW cards that draw more power.

How high can/should I go with the RG before it starts to cause problems? 10V? 12V?

Any suggestions would be appreciated.

Travis
--
==============================
  M. Travis Brown, MCSE
  Network Systems Engineer
  NetWave Internet
  434.386.0656
  travis@netwaveva.com
  http://www.netwaveinternet.com
==============================