Senao cards are crap, use the Zcomax cards
-Charles
-----Original Message-----
From: karlnet-bounces@WISPNotes.com
[mailto:karlnet-bounces@WISPNotes.com]On Behalf Of Don Starnes
Sent: Friday, March 28, 2003 9:57 AM
To: Karlnet
Subject: [Karlnet] WPBASE+ with SENAO 200mw radio cards
Hello everyone,
I am having a hard time trying to get the new WPBASE+ to work with SENAO
200mw (Intersil 2.5) or 100mw (Intersil 2.0) radio cards. The board
recognizes the radios and will let you program them as usual. The problem
seems to occur after they have been in service for a few hours. I get very
erratic behavior from the boards such as:
1. Second radio stops working
2. Second radio disappears
3. Port shows empty PCMCIA when I know there is a card in it.
I know everyone's setup can be different. We are using 12v 10a power
supplies to power these boards. We have version 4.43a bin file on the
radios.
Any suggestions?
Thank You,
Don
_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet
|