TenTec
[Top] [All Lists]

[TenTec] RF & Pegasus

To: <tentec@contesting.com>
Subject: [TenTec] RF & Pegasus
From: aa8ve@juno.com (JEFF S JOHNSON)
Date: Thu, 9 Dec 1999 16:37:41 -0500
I checked my Omni-V and the output for the mic is 8.6 volts.    I wonder
why they now supply only 4.5 volts?  Is anyone running a 705 off the
Pegasus with any problems? Perhaps 4.5 is enough to run the 705 from
anyway.  What is the voltage out in the mic jack on an Omni-VI anyway?

73 Jeff aa8ve

On Thu, 9 Dec 1999 13:22:19 -0400 (AST) David McClafferty
<at060@chebucto.ns.ca> writes:
> 
> 
> 
> On Thu, 9 Dec 1999, JEFF S JOHNSON wrote:
> 
> > 
> > I should hope Pegasus has DC voltage out for the Mic. so a battery 
> is not
> > needed.
> > 
> 
> I did not have a battery in my 705 when I used it with the Omni V. 
> When I
> got the Pegasus the LED on the 705  base would only glow very dimly 
> and
> the rig was obviously not being fully modulated, so I had to put a 
> battery
> in. The manual says it provides 4.5 Volts for electret mics. 
> Appearently
> that not enough for the 705. I hope that we will get schematics 
> someday so
> one could look into modifying such things. I hate batteries, they 
> leak and
> ruin a lot of good gear.
> 
>                               73, Dave, VE1ADH


___________________________________________________________________
Why pay more to get Web access?
Try Juno for FREE -- then it's just $9.95/month if you act NOW!
Get your free software today: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>