TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[TenTec] BNC vs UHF connectors for HF 100w use

from [Stuart Rohre] [Permanent Link][Original]
To: <tentec@contesting.com>
Subject: [TenTec] BNC vs UHF connectors for HF 100w use
From: rohre@arlut.utexas.edu (Stuart Rohre)
Date: Thu, 11 Apr 2002 18:48:00 -0500 
Not true, the N connector pin is larger,  maybe by a factor of 3 plus?  Of
course this is tricky, because of skin effect it is the area of the outside
of the pin that is carrying the most current.

Stuart K5KVH
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [TenTec] BNC vs UHF connectors for HF 100w use, Jim Reid
Next by Date:  [TenTec] Type N pin vs. BNC pin, Stuart Rohre
Previous by Thread:  [TenTec] BNC vs UHF connectors for HF 100w use, Dr. Gerald N. Johnson, electrical engineer
Next by Thread:  [TenTec] BNC vs UHF connectors for HF 100w use, Tom Rauch
Indexes:  [Date] [Thread] [Top] [All Lists]