TenTec
[Top] [All Lists]

Re: [TenTec] adding serial ports to computer

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] adding serial ports to computer
From: n8kom@wowway.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 19 May 2006 07:00:16 -0600
List-post: <mailto:tentec@contesting.com>
Hi Jack -
Another option (similar to your computer store find) for anyone looking to 
add serial ports is to look for a multi-port RS-232 PCI card like the type 
made by MOXA or COMTROL.  They have 4 port and 8 port PCI cards that can be 
bought on the used market pretty reasonable, as people move toward USB based 
serial devices.  I use a 4 port PCI card and now have a total of six DB-9 RS-
232 serial COM ports in my desktop.

73 - Steve


On Thu, 18 May 2006 21:55:49 -0600, jack wrote
> after doing much checking as to USB to Serial, i took the suggestion 
> that i add a PCI serial port card to my desktop. today i found a 
> small computer store that actually had a PCI I/O card with two 
> serial ports and a parallel port. i just installed the card and 
> drivers. now my desktop has 4 serial ports and 2 parallel ports. all 
> for a few moments and $30.15. simple is the word for desktops if one 
> has the slot available. finding the card is more difficult than 
> installation by far. jack ak7o 
_______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>