Hi everyone who answered my request. I am using Windows 10 and WL
12.08C/WLFlexDriver1203A. Also the rig is a FLEX-6300 running AFSK with
virtual audio and ptt cables I tried running the plug-in with the
LegacyInstaller from different folders, i.e. MMTTY, Download, but Windows
would not let move the Plugin to the Writelog directory (C:\Programs Files
(x86)\Writelog\Programs\) to run.
My desktop computer which is Windows 10 has the Plug-in stalled a working
fine. I think that because I had the plugin installed in Windows 8.1, that
when Windows did the upgrade to windows 10 that the plug-in stayed.
Now all of this discussion is good, but I really don't need the plug-in on
the Laytop. I am only Installing WL on the Laptop so that I can use it
via WIFI upstairs on those cold winters night where I don't want to go down
to the cold basement hamshack.
One note, "It is possible to achieve what you desire using the new .ocx
plugin. You have to simply select the option "speed limiting" this is by
going to options... Setup... Misc (tab) under to port select third option
and click on"usb-port. There are 4 options: speed limiting seems to be
best but sometimes on certain computers "polling & speed limiting" seem to
be better... Hope that makes sense.
Regards
Dean" Joe suggested it too
I tried this a using the polling & speed limiting" options and it worked,
not 100 percent but at least I can follow the characters by both sight and
sound.
So far my use, I think this topic should be closed. Thanks for everyone
help.
Joe K0BX
#1 Honor Roll Mixed
Honor Roll Phone
Honor Roll CW
Honor Roll RTTY
Honor Roll 20 Meters
5BDXCC Plus 30,17,12
5BWAS
On Tue, Nov 1, 2016 at 6:45 PM, Don AA5AU <aa5au@bellsouth.net> wrote:
> I suppose it's possible that the plug-in no longer works with WriteLog
> V12. It seems to me that at one time I had the plugin installed on my
> Windows 10 machine but I don't know if that is when I had WL V11 or
> installed or what the circumstances were.
> I could have uninstalled it while beta testing and never reinstalled it. I
> don't remember.
> I just did a full install of V12.01 on my Windows 7 laptop and when I
> tried to install the MMTTY plugin, I get the same error. It's not a Windows
> 10 issue.
> Maybe the MMTTY plugin is not compatible with WL V12?
> Don AA5AU
>
>
>
>
> From: John Maglio <jgmags@comcast.net>
> To: Don AA5AU <aa5au@bellsouth.net>
> Sent: Tuesday, November 1, 2016 12:54 PM
> Subject: Re: [WriteLog] MMTTYPlugin for Writelog problem
>
> Hello Don and Joe, I also get that message
>
> "Writelog must be installed, when trying to install MMTTY plug-in.
> 73, John KJ1J
>
>
> On 11/1/2016 9:46 AM, Don AA5AU wrote:
> > "Writelog must be installed
>
>
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|