Thanks Steve:
When I get to my local library, I will review the Hints and Kinks. I normally
do this each time, but I have no recall of such hints/kinks.
If you or anyone else can tell me the specific article, that would be helpful to
me in finding the QST issue.
It appears that I need to clean out the memory stack for the ATU for matching
such extremely short physical antenna loads, as was done here on my 10m
experiment.
Is there a simple/magical reset of the ATU memory stack in the FT1kD ?
I now do have the article posting that I was originally seeking, thanks to John,
K1RC. I cannot provide a date, if anyone else is searching the archive, but
this is part of the heading that is included in the article:
From: Anthony Bowyer <adb1x1@yahoo.com>
Subject: [Yaesu] FT-920 Antenna Tuner Problems
Many thanks again to all that respond(ed).
73s, de ~ Vince ~
Steven Moore wrote:
> Vince,
>
> This was dealt with in qst hints and kinks a couple of months or so ago. Rig
> was a 920 though. The guy discusses how to get it right again.
>
> 73
> Steve wd0ct
|