Yaesu
[Top] [All Lists]

[Yaesu] Problem in ATU of FT1000D

To: <yaesu@contesting.com>
Subject: [Yaesu] Problem in ATU of FT1000D
From: wd0ct@networksplus.net (Steven Moore)
Date: Tue, 13 Nov 2001 17:19:08 -0600
Vince,

This was dealt with in qst hints and kinks a couple of months or so ago. Rig
was a 920 though. The guy discusses how to get it right again.

73
Steve  wd0ct

----- Original Message -----
From: "Vince" <wa.tworsx@verizon.net>
To: <yaesu@contesting.com>
Sent: Tuesday, November 13, 2001 4:30 PM
Subject: [Yaesu] Problem in ATU of FT1000D


> I recall reading here, I think, about the motorized capacitor plates not
> being properly positioned for fully meshed and/or fully unmeshed within
> the ATU.  Can someone lead me to that same information thread?  I have
> tried locating that info within the archive, but no joy.....   Give me a
> date reference, possibly....
>
> I have a FT1kD here that has developed a problem in ATU tuning on 10
> meter operation when going into a dummy load antenna or when going into
> my normal 10 meter antenna. The VSWR is indicated as a minimum of 1.4 to
> 1  when going to the dummy load antenna.  Now when loading into my
> normal 10 meter antenna, the VSWR is no better than 2 to 1 with the ATU
> enabled.
> Apparently something has been messed up within the ATU.    ( ? )
>
> Any other info will be greatly appreciated.
>
> Thanks,
> 73s de Vince, WA2RSX
>
> _______________________________________________
> Yaesu mailing list
> Yaesu@contesting.com
> http://lists.contesting.com/mailman/listinfo/yaesu
>


<Prev in Thread] Current Thread [Next in Thread>