>......
>As for the 3CX1200A7 having a problem in some other brand of amplifier, OK,
>I'll take your word for it. Let's put it as more the manufacturer than the
>tube.
>
>As for HENRY using this tube in their HF amps, it is an excellent performer
>and VERY stable!
>
The 3CX1200A7 has approx. 6x as much feedback-C as an 8877.
>My HENRY 3K Classic X MKII (using a 3CX1200A7) will put out into a 50 ohm
>load 2500 watts on 10M with drive that still doesn't push grid current to
>tube max ratings.
There is no maximum grid current rating for the 3CX1200A7.
>Hmmmm, with these "extra losses at the high end of the HF spectrum" I would
>say it must be "properly tamed" eh?
>
no
>As if there is some shame in stating facts about HENRY amps. .....
Henry has produced 3-500Z amplifiers the use c. 6v on the filaments.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|