[AMPS] 3/2 power law and Rich's very wide signal

[petter.gardin@aerotechtelub.se (petter.gardin@aerotechtelub.se)]

Yes the measurements will be made at different power output levels first of
all on the 'DAF' circuit but if time permits also on an conventional amp
(AB1 or AB2)

Peter Chadwick skrev:

> Petter says:
>
> >We will try three-tone and dynamic three-tone
> >tests. This to get the most information regaring the amplifiers dynamic
> >characteristics.
>
> Excellent! Will it be possible to do the tests at a number of PEP output
> levels up to the maximum rating of the tube in AB1 or AB2?
>
> I ask because one can visualise a 3500 watt tube being good at 400 watts
> whatever the circuit, while a 250 watt tube wouldn't.
>
> 73
>
> Peter G3RZP

--
Petter Gärdin

Senior EMC Engineer
AerotechTelub
Telub AB
Division Flyg- och Bassystem
P.O. Box 360
SE-831 25 ÖSTERSUND, Sweden
Visiting Address: Storlienvägen 56

Operator: +46 63 15 60 00
Direct: +46 63 15 62 33
Fax: +46 63 15 61 99
E-Mail: petter.gardin@aerotechtelub.se
http://www.emc.just.nu/



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm