>
>Yes the measurements will be made at different power output levels first of
>all on the 'DAF' circuit but if time permits also on an conventional amp
>(AB1 or AB2)
>
The flaw only shows up during voice modulation.
>
>> Petter says:
>>
>> >We will try three-tone and dynamic three-tone
>> >tests. This to get the most information regaring the amplifiers dynamic
>> >characteristics.
>>
>> Excellent! Will it be possible to do the tests at a number of PEP output
>> levels up to the maximum rating of the tube in AB1 or AB2?
>>
>> I ask because one can visualise a 3500 watt tube being good at 400 watts
>> whatever the circuit, while a 250 watt tube wouldn't.
>>
>> 73
>>
>> Peter G3RZP
>
>--
>Petter Gärdin
>
>Senior EMC Engineer
>AerotechTelub
>Telub AB
>Division Flyg- och Bassystem
>P.O. Box 360
>SE-831 25 ÖSTERSUND, Sweden
>Visiting Address: Storlienvägen 56
>
>Operator: +46 63 15 60 00
>Direct: +46 63 15 62 33
>Fax: +46 63 15 61 99
>E-Mail: petter.gardin@aerotechtelub.se
>http://www.emc.just.nu/
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampsfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|