Amps
[Top] [All Lists]

[AMPS] Hi Power Connectors

To: <amps@contesting.com>
Subject: [AMPS] Hi Power Connectors
From: i4jmy@iol.it (i4jmy@iol.it)
Date: Wed, 22 Nov 2000 12:18:42 +0100
> ---------- Initial message -----------
> 
> From    : owner-amps@contesting.com
> To      : amps@contesting.com
> Cc      : 
> Date    : Wed, 22 Nov 2000 10:28:23 -0000
> Subject : RE: [AMPS] Hi Power Connectors
> 
> 
> Nobody has mentioned HN connectors. Is this because they're not very 
common, or
> what?
> 
> I've never seen an N type used at 1kW professionally; most of the 
equipment I've
> seen used either C type or HN or UHF at HF - usually C types until 
recently.
> 
> 73
> 
> Peter G3RZP

The N connector is widely used up to 0.8-1 Kw.
Above 800W and up to a couple of Kw the preferred connectors are 7-16 
(mostly devoted for TV applications and in Europe) and 7/8" EIA flange. 
Larger size EIA flanges are used for bigger power (typ. 3 1/8" for 50 
KW).
The LC type, a sort of PL259 descendant, is also considered obsolete.

73,
Mauri I4JMY



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>