Amps
[Top] [All Lists]

[AMPS] Hi Power Connectors

To: <amps@contesting.com>
Subject: [AMPS] Hi Power Connectors
From: Denis_Jackson@Mitel.COM (Denis_Jackson@Mitel.COM)
Date: Wed, 22 Nov 2000 15:09:18 +0000


From:  Denis Jackson@MITEL on 11/22/2000 03:09 PM GMT
Anyone know of a similar product in the UK?

/Denis MW0CBC






W8AV@aol.com on 22/11/2000 00:10:20

To:   rakefet@rakefet.com, amps@contesting.com
cc:    (bcc: Denis Jackson/Cal/Mitel)

Subject:  Re: [AMPS] Hi Power Connectors




In a message dated 11/21/00 3:12:54 PM GMT Standard Time, rakefet@rakefet.com
writes:

<<  Actually, in my experience the most important factor
 (after installation and coax seal), is that the so-239 be of high quality to
 insure good contact to the center pin.
  >>

I use Duct Seal that you can get from an electrical supply store.  About $5
for a 5 lb block of the stuff.  It works as good as Coax Seal at a fraction
of the price.  You can also get it at Home Depot/Lowes/DIY, etc.  Hey, if
it's good enuf for the power company to waterproof power drop connections,
why not!


73......de Goose W8AV

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com






--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>