RMS current and voltage are calculated for a full cycle or multiple cycles.
73
Bill wa4lav
At 10:31 AM 11/7/2002 -0500, Martin, Maximo wrote:
>If,
>RMS voltage times RMS current (both in phase) is the equal to AVERAGE
>and PEP is AVERAGE too, so
>PEP=RMS voltage times RMS current?
>
>Max.
>
>
>
>-----Original Message-----
>From: Bill Fuqua [mailto:wlfuqu00@uky.edu]
>Sent: Thursday, November 07, 2002 10:10 AM
>To: amps@contesting.com
>Subject: Re: [Amps] RMS-PEP & 2x8877
>
>
>PEP is the AVERAGE power for one full cycle calculated at the peak of the
>envelope.
>There is no RMS power. There is RMS current and RMS voltage. RMS voltage
>times RMS current (both in phase) equals
>average power.
>
>73
>Bill wa4lav
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
|