Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] RMS-PEP & 2x8877

from [Steve Thompson] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] RMS-PEP & 2x8877
From: g8gsq@qsl.net (Steve Thompson)
Date: Thu, 7 Nov 2002 16:12:38 -0000 
----- Original Message -----
From: Martin, Maximo <Maximo.Martin@icm.siemens.com>
To: 'Bill Fuqua' <wlfuqu00@uky.edu>; <amps@contesting.com>
Sent: 07 November 2002 15:31
Subject: RE: [Amps] RMS-PEP & 2x8877


> If,
> RMS voltage times RMS current (both in phase) is the equal to AVERAGE
> and PEP is AVERAGE too, so
> PEP=RMS voltage times RMS current?
Yes - you do the calculation with the *rf* rms voltage and current at the
peak of the modulation envelope.

Steve
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Amps] RMS-PEP & 2x8877, TimNebo@aol.com
Next by Date:  [Amps] RMS-PEP & 2x8877, Terry Gaiser
Previous by Thread:  [Amps] RMS-PEP & 2x8877, Bill Fuqua
Next by Thread:  [Amps] RMS-PEP & 2x8877, wl fuqua
Indexes:  [Date] [Thread] [Top] [All Lists]