Amps
[Top] [All Lists]

[Amps] Question about ampifiers

To: <amps@contesting.com>
Subject: [Amps] Question about ampifiers
From: carlos.augusto at superig.com.br (Carlos Augusto S. Pereira)
Date: Sun Apr 13 23:34:04 2003
Yes, Dave is right. The laundery machine is connected to a 220v outlet. The 
lower voltage measured is 217 and the highest is 222.

73 Carlos PY4RO
  ----- Original Message ----- 
  From: Wt8r@aol.com 
  To: garyschafer@attbi.com ; carlos.augusto@superig.com.br ; 
amps@contesting.com 
  Sent: Monday, April 14, 2003 12:28 AM
  Subject: Re: [Amps] Question about ampifiers


  In a message dated 4/13/03 10:16:27 PM Eastern Daylight Time, 
garyschafer@attbi.com writes:



    Hi Carlos,

    If you are getting your power from a 3 phase line, and you have 120 
    volts then there should be only 208 volts across the two phases. I ran 
    into that problem at a military installation I was at one time. There 
    was no 240 volts to be had. Only 120 and 208 or 3 phase. The amp would 
    not work well on the 208.

    73
    Gary  K4FMX



  It depends on the configuration of the transformer feed the outlet, either 
"Y" or "Delta".  It is conceivable that a small transfomer could be obtained to 
perform the conversion and thereby raised the voltage.

  73 de

  Dave, WT8R 
<Prev in Thread] Current Thread [Next in Thread>