Amps
[Top] [All Lists]

[Amps] 10dB and propagation

To: amps@contesting.com
Subject: [Amps] 10dB and propagation
From: "David G4FTC" <g4ftc@hotmail.com>
Date: Mon, 07 Feb 2005 17:29:29 +0000
List-post: <mailto:amps@contesting.com>
I don't believe there is ANY transmitter on earth (amateur or pro)
that could influence the ionosphere by causing a non-linear behavior
in that.

No one seems to have mentioned the Luxembourg Effect. This resulted in Radio Luxembourg?s signal appearing on other nearby signals through ionospheric cross-modulation.


In the past there have been a number of well publicised experiments using ionospheric heaters in an attempt to partially control (or more correctly modify) the characteristics of the ionosphere. Some of these experiments may still be on-going.

The power emitted by these ionospheric heaters is QRO in terms of man-made radiated power but is only a fraction of the energy which the ionosphere receives from the Sun. The key seems to be using the right frequency from the right location ? and most ionospheric heaters seem to exploit the properties of that part of the ionosphere which contains the polar electrojet (E layer?), which under the correct conditions, can be apparently controlled/modified with relatively small amounts of incident energy.

In 1996 the BBC made a ?Horizon? programme called ?Masters of the Ionosphere? which outlines the history of man?s attempts to control the properties of the ionosphere, sometimes with quite amazing results. For anyone interested in some of the more unusual aspects of radio propagation, this programme is highly recommended. Transcripts of the script are available for download from a number of Internet sites ? a google search on ?Masters of the Ionosphere? will give locations, but the video really is worthwhile viewing as it contains many graphics which really help to illustrate the underlying principles involved.


David G4FTC



_______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>