On Oct 13, 2005, at 7:22 PM, N2TBA wrote:
> Monty,
>
> Can you Say Ground Loop..? I know you can.. Electric code wasn't
> written
> for RF applications ...
Amen, Leo.
>
>
> Leo
> ----- Original Message -----
> From: "monty taylor" <montytaylor@texoma.net>
> To: "'Carcia, Francis A HS'" <francis.carcia@hs.utc.com>; "'Paul'"
> <condor@mags.net>; <amps@contesting.com>; <TexasRF@aol.com>;
> <wa6fgi@sbcglobal.net>
> Sent: Thursday, October 13, 2005 4:51 PM
> Subject: Re: [Amps] Dedicated 220AC Wiring for Amps..
>
>
>> Gents,
>>
>> Thanks for all the replies. As a result I will RF ground outside my
>> windows today as I already have the 8 foot rod ready to go. I will
>> also
>> run a #6 copper wire back to my main breaker box as an AC ground per
>> the
>> new code. I happen to have 250 feet of #6 that I was going to use for
>> other purposes and it will be easy to run.
>>
>> Regards,
>> Monty/WB5GLB since 1969
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|