Re: [Amps] working backwards to setup tank

["Phil Clements" <philc@texascellnet.com>]

> > I set this tank circuit up and tuned at 7.250mhz, came up with a
> beautiful
> > output
> > then tried to do the reverse check. I put a 2k resistor from the plate
> to
> > ground, hooked
> > the MFJ analizer up using the settings previously obtained and for th e
> > life of me cannot find
> > a good resistive value to make the swr analizer 1:1 swr or close. I used

Is your antenna relay keyed up or jumpered?

(((73)))
Phil, K5PC



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps