Phil,
The 8660 is the equivalent to the 4CX1500B,
The driver tubes are 8122 I found out.
Again, if I drive a 8171 to not more then 1,5KW output ever,
it should be tuned for that power, not for 20KW
73
Peter
-----Original Message-----
From: Phil Clements [mailto:philc@texascellnet.com]
> You are claiming that two 8660 tubes drive another pair of 8660 tubes?
No, there is only one pair of driver tubes in class A.
>
> The original posting meant eventually that the output network should be
> adjusted for the power to be operated and not to that the tubes are
> capable
> of.
I disagree with that premise.
> That does not mean that parts could not be oversized.
Bigger is usually mo bettah! I over-engineer everything.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|