Amps
[Top] [All Lists]

Re: [Amps] Quad Tube 4cx800 hf amp

To: <amps@contesting.com>
Subject: Re: [Amps] Quad Tube 4cx800 hf amp
From: "Peter Voelpel" <df3kv@t-online.de>
Date: Sat, 27 May 2006 00:31:38 +0200
List-post: <mailto:amps@contesting.com>
In the Harris manual of the RF110-A the driver tubes are shown as 8122 and
the 8660 finals as 4CX1500B.
Agreed on the tank circuit. 

73
Peter


-----Original Message-----
From: Phil Clements [mailto:philc@texascellnet.com] 
Sent: Samstag, 27. Mai 2006 00:13
To: 'Peter Voelpel'; amps@contesting.com
Subject: RE: [Amps] Quad Tube 4cx800 hf amp

> The 8660 is the equivalent to the 4CX1500B,
> The driver tubes are 8122 I found out.

Sorry for the error; 8660 is the Harris designator for the 8122.

> 
> Again, if I drive a 8171 to not more then 1,5KW output ever,
> it should be tuned for that power, not for 20KW

Also, the tank circuit should be designed for a Q of 10-12 at the voltage
and current drawn at 1.5 kw, not 20 kw.

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>