Amps
[Top] [All Lists]

Re: [Amps] IM distortion and such

To: "Tom W8JI" <w8ji@w8ji.com>
Subject: Re: [Amps] IM distortion and such
From: R L Measures <r@somis.org>
Date: Tue, 27 Jun 2006 06:19:46 -0700
List-post: <mailto:amps@contesting.com>
On Jun 27, 2006, at 2:46 AM, Tom W8JI wrote:

>> They can be used on up in current, say for pulse circuits
>> and RF heating. The 400 mA is the maximum plate current at
>> single tone for minimum distortion. That's for 600 watts
>> PEP useful power each. That's listed in the tables on page
>> 2 or 3 under a class B RF amp.
>
> Will,
>
> Where did you get the idea 400mA is a "minimum distortion"
> condition?

Good point, Tom.  Will should have said something like:  for minimal  
distortion, the max rated anode-I is 400mA.
>
> 73 Tom
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

R L MEASURES, AG6K. 805-386-3734
r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>