ORIGINAL MESSAGE:
On Sat, 11 Sep 2010 15:40:22 -1000, Ken Brown
<ken.d.brown@hawaiiantel.net> wrote:
>Trying to hot plug or hot unplug a high voltage wire is hazardous whether it
>is shielded or not.
REPLY:
Not if the right connector is used.
With an unshielded, deeply recessed female connector on the PS side
and a flying lead hard wired into the amp side, you can hot-plug all
you like with no danger.
There must be a solid ground connection between the two chassis, but
that is true for any connector configuration.
Bill, W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|