Thank you to all who replied and offered advice. It has reinvigorated my quest
to build my own amp. No matter how ugly it may appear it will be mine. I
retire in mid 2014 and the amp project will be the start of my next adventure
Jerry
K1JOS
-----Original Message-----
From: Dino Darling [mailto:dino@kx6d.com]
Sent: Friday, January 17, 2014 12:16
To: Jerry; Amps@contesting.com
Subject: RE: [Amps] Building an Amp 101
You can build one in a plywood box!
Start here to LEARN...
http://somis.org/
Dino - KX6D
-------- Original Message --------
Subject: [Amps] Building an Amp 101
From: "Jerry" <jsternmd@att.net>
Date: Fri, January 17, 2014 7:10 am
To: <Amps@contesting.com>
I have had a long desire to build my own linear HF or VHF amp. I believe I have
the electronic technical skills but after looking at some completed projects
like those on WD7S website, I realized I don't have the skills or tools to do a
nice job on the mechanical aspects of chassis / sub-chassis sheetmetal work. I
guess I could cram it all into an unattractive box behind a reasonable looking
front panel but is linear amp building mainly for those with good metal work
capabilities? How does one break into this with limited workbench space other
than an electronic workbench?
Jerry
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|