Amps
[Top] [All Lists]

Re: [Amps] HIGH FILAMENT VOLTAGE

To: "RCM" <robrk@nidhog.net>, "AMPS submit" <amps@contesting.com>
Subject: Re: [Amps] HIGH FILAMENT VOLTAGE
From: "Jim W7RY" <jimw7ry@gmail.com>
Date: Sun, 11 Dec 2016 19:23:40 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
SB220 filament winding is on a separate transformer. SB200 is the same transformer.

73, Merry Christmas.
Jim W7RY/0


-----Original Message----- From: RCM
Sent: Sunday, December 11, 2016 1:32 PM
To: AMPS submit
Subject: Re: [Amps] HIGH FILAMENT VOLTAGE


On Dec 11, 2016, at 14:12, Bryan Swadener via Amps <amps@contesting.com> wrote:

I suggest NO diodes or resistors in the LV side of the xfmr.
A buck transformer in the primary loses or looses [sic] the
least power.


The secondary needs to handle the amplifier's
primary current.

????????????

Many Amps, Heath SB220, Many Henry’s, filament voltage is supplied from a winding on the main transformer.

Anything stuck on the primary will effect all voltages.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>