Amps
[Top] [All Lists]

Re: [Amps] HIGH FILAMENT VOLTAGE

To: AMPS submit <amps@contesting.com>
Subject: Re: [Amps] HIGH FILAMENT VOLTAGE
From: RCM <robrk@nidhog.net>
Date: Sun, 11 Dec 2016 14:32:08 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
> On Dec 11, 2016, at 14:12, Bryan Swadener via Amps <amps@contesting.com> 
> wrote:
> 
> I suggest NO diodes or resistors in the LV side of the xfmr.
> A buck transformer in the primary loses or looses [sic] the
> least power.


> The secondary needs to handle the amplifier's
> primary current. 

????????????

Many Amps, Heath SB220, Many Henry’s, filament voltage is  supplied from a 
winding on the main transformer.

Anything stuck on the primary will effect all voltages.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>