Date: Sun, 11 Dec 2016 15:42:54 -0500
From: "qrv@kd4e.com" <qrv@kd4e.com>
To: amps@contesting.com
Subject: Re: [Amps] SS amps and auto-tune. Is it even necessary?
What might it cost of someone made and sold a filter like this?
For a homebrew driver source, variously rated 10w, 120w, and for
an amp 600w and 1200/1500w?
http://www.qsl.net/wm5z/qex199907.pdf
73, David KD4E
## This is an ingenious use of a Diplexer. I dont see a reason why this
concept
could not be scaled up to the 1500++ level. If you look closely at his
schematics, its just
a LP + HP filter....with a 50 ohm dump resistor on the output of the HP filter.
## harmonics..esp the 3rd, are not reflected back to the transistors like a
typ LP filter....degrading IMD.
Instead the harmonics are eaten up by the dump resistor.
Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|